Filter
Top Products
•
The “DELAY” symbol will flash to indicate that the
feature as been disabled.
This feature may be enabled using the following proce-
dure:
•
Press and hold the Heated Rear Window and Auto HI
buttons for 5 seconds.
•
The “DELAY” symbol will flash to indicate that the
feature as been enabled.
Power Button
This button turns the entire system ON/OFF. When the
system is turned on it will return to the previous settings.
Dual/Single Zone Operation
When ЉDUALЉ is displayed in the ATC control unit, the
driver and passenger air outlet temperatures can be
individually adjusted from the two independent ЉTEMPЉ
buttons. When a front seat passenger is not present,
pressing the ЉDUALЉ button will disable the passenger’s
infrared sensor and control the entire system based only
on the driver’s temperature setting. The outside tempera-
ture will replace the passenger’s temperature setting in
the display. Pressing the ЉDUALЉ button a second time or
adjusting the passenger’s ЉTEMPЉ button will reactivate
the passenger’s infrared sensor and return the system to
dual independent temperature operation.
Manual Operation
This system offers a full complement of manual override
features. The indicator light in both the ЉAUTO HIЉ or
ЉAUTO LOЉ buttons will turn off when the system is
being used in the manual mode. The fan speed, airflow
distribution, and outside air/recirculated air can be
manually adjusted.
NOTE: Each of these features can be operate indepen-
dently from each other. If any one feature is controlled
manually, the remaining features will continue to operate
automatically.
UNDERSTANDING YOUR INSTRUMENT PANEL 185
4