Raymarine GPS navigation GPS Receiver User Manual


 
.
.
0.
Sensor Inputs:
Alarms:
Data Output:
Data Output Rate:
Data Input:
Display type:
Display Backlighting:
Memory Back-up:
Input Voltage:
Power Consumption:
4.6.2 Display Data
Latitude/Longitude:
TD Pair:
Stations:
Satellite Data:
Waypoints:
Bearing & Range:
Time-To-Go:
Speed & Course:
Receiving Status:
Cross-track-error:
Corrections:
Loran-C, GPS
Waypoint
Arrival, Anchor Drift,
Cross-Track-Error, Man-Overboard,
“NO FIX” for poor signal inputs.
Single Port; NMEA
0180/0183
&
SeaTalk;
NMEA 0 183 includes
GLL, GTD, VTG, APB,
RMC , BWC, RMA, and RMB.
Every 2 seconds for RMA or RMC, & RMB
every 4 seconds for all other data.
From GPS Sensor; accepts NMEA 0183 GLL,
VTG, RMC, GGA.
From Loran Sensor; accepts NMEA 0 183
GLL, GTD,
VTG,RMA,
Data Input Port; NMEA 0183
WPL, RTE
STN LCD, Dot Matrix 240 x 240dots
FL panel
Lithium Battery, 3-5 years
lo-16 VDC
Less than 6 watts
N or S + 6 digits,
.OOl
min. resolution
E or W + 7 digits,
.OOl
min. resolution
6 digits, 0.1 us resolution, for each
selected Time Difference.
GRI and Selected Secondaries.
Sat ID, Azimuth, Elevation, SNR, HDOP
Lat/Lon and TD coordinates displayed.
Bearing & Range to waypoints, and between
waypoints in a route plan.
Remaining time to
waypoint
at current
speed in hours and minutes.
SOG & COG calculated from L/L position
changes; Averaging period selectable.
Tracking status, SNR, and ECDs
of MASTER and selected secondaries.
Shows di%ance off-course in O.Olnm
increments.
1) Magnetic Variation, Auto/Manual
2) Position Offset (ASF) via:
a. Auto DMA ASF program (Note:
upgraded to most recent tables)
1
MAINTENANCE 4-4