Filter
Top Products
When you have completed the entry of all the waypoints for a particular
route plan, just press
thewqkey.
The new route plan will be stored and
the display will promptly return to the last used Display mode.
3.9.2
FollowRoute
Plans
Once a route plan has been made and saved into
I/
memory, it can be recalled to Followed or to be Edited.
Press
the-key.
The ROUTE MODE screen will
appear. Press
theI-
softkey.
when
the
FOLLOW ROUTE
Selector screen appears
use the numeric keys to type the number of the route
plan to
FOLLOW.
Example
Press
4,lm(for
route plan # 4.
SEQUENCE MODE
4
mm
MAN
OFF
The FOLLOW ROUTE
Setup screen appears. Once
route plans have been made, this screen permits en-
gagement of route sequence operation.
ThelSEQUENCE
MODq
softkey enables you to select the type of
waypoint
sequencing mode between
AUTO
or
MANUAL
. The other choice turns the
route sequence mode to OFF. Press
th+EQUENCE
MODElsoftkey
to high-
light the desired sequencing mode.
AUTO SEQUENCING
mode automatically steps from one waypoint to the
next when the arrival perpedicular point has been detected.
In MANUAL SEQUENCING
mode, the unit sounds the arrival
akrn
and the
operator will manually press
the-1
key to step to the next leg in the
route plan when it is safe to do so.
When the Sequencing mode is decided, the next
1
FOLLOW ROUTE
t
4
1
step is to decide to follow the route in the Forward
direction (first to last), or to follow the route in Re-
SET ARRIVAL DISTANCE
verse (last to first). Just press
the/mor//qdirec-
Il.
1ONM
tion softkey to advance to the next screen.
The last display shows the Arrival alarm distance that
PRESS ENT TO END
will be used to alert you as each
waypoint
is ap-
proached. You may accept the limit by pressing
thd=lkey
or enter a
limit of your choice on this screen. To enter a new arrival zone limit, type
the numbers of the desired limit distance and press
the/e[key.
OPERATION 3-32