Filter
Top Products
Press lCLEAR[twice to return to the last selected display mode.
3.5.6 Simulator
Mode
I
PLOT MENU
The
NAV 398
includes a simulator mode which can
TRACK MENU +
show simulated readouts on the various screens. There
DlSPlAY
MENU
+
are dynamic simulated screens for both loran and GPS
and can be used to demonstate navigation to waypoints
and following route plans.
To turn the simulator ON, be in Plot mode and press
thelE\key
. Press
the
~SIMULATOR~
sofIkey
to ON. Conversely, to turn OFF the simulator,
press
the/
SIMULATORlsof&ey
a second time. When the simulator mode is
ON, “SIM” flashes on the various display screens.
3.5.7
Display Mode Operations
While you are on any of the POS, NAV, CDI, or PLOT display modes you
can perform the following operations:
l
Save an
Event....Press
thdm[
key.
The Event message will appear and show the
saved memory #.
l
GO
TO
a Destination...Press the
wi
key.
Enter the
waypoint
#
using three digits and
then
press(ENTET\1.
3.5.7.1 Saving Events
You can save your present position for future use as a waypoint when you
are in any of display modes. The
EVENT
data will be stored sequentially into
the next available
waypoint
memory just like a normal waypoint.
Just press
theI-
key. A
message prompt appears to permit you to
select any other memory # location. If no keys are pressed in live seconds,
the message will show the Event memory number and then disappear.
If during the 5 second period you type in a different memory number and
press
thdmlkey,
the Event will be saved into the memory that you have
designated. If the memory number you typed was the same number as your
current destination, upon pressing
the(ENTERl[key
the screen alerts you by
showing
"DEST
PT"
flashing. If you typed the memory number by mistake
and really don’t want to overwrite your destination point, just press the
-Ikey.
If you DO
want to update the current destination coordinates,
OPERATION 3-16