Filter
Top Products
TNEN PRESS ENTER
lWTHT oolomt.
bWT)
SIGNAiY&T”S
OPERATIONS
PRESS
arm
To izxm
NOTE:
RETURNS To
slsw
sThW.9
Press
the[Gikey
to return to the Main Menu Directory.
L/L Digits ( L/L Resolution)
The next item of the SF menu selects the latitude/longitude readout resolu-
tion . The readouts can display to
VlOOths
of a minute or
l/lOOOths
of a
minute. The readouts are set to .OO’ from the factory. Press the
I-
softkey for .OOO readouts.
When the
lmjsoftkey
is pressed , the SF2 menu will appear. On this
menu you can set the Time & Date readouts on the GPS Signal Status page
to show the UTC Time & Date when
the/ml
softkey is pressed.
The last menu item starts the SATELLITE SEARCH mode. when this
softkey
is pressed it is requesting the GPS sensor to refresh its almanac data in
memory. The message prompt will ask you to press
them[key
if you
wish to proceed. Press
PJ
if you choose to abandon a SATELLITE
SEARCH
. The accumulation of almanac data normally takes anywhere from
15 minutes up to 30 minutes.
OPERATION 3-44