Filter
Top Products
The arrival alarm is preset to 0. lnm and activates whenever you are within
this area relative to the MOB. As always, press the
-1
key to silence
the audible alarm.
To Cancel the MAN-Overboard function and return to the Position
dis-
playpress and hold
the[MOB/8lkey
for about 3 to 4 seconds until a second
beep is heard and the MOB characters disappear from the screen.
NOTE:
The MOB location is not “Saved” to memory permanently and the
location will be lost when the MOB mode is cancelled. If you will need to
retain the location for some reason, mark the location with
themjkey
after the mode is cancelled.
3.9 Route Plans
The
NAV
398 allows you to create up to 10 route plans using a maximum
of 200 waypoints or 20 per each route. When
the//key
is pressed, the
display will show the Route Mode menu, which will allow you to choose to
Make, Follow, or Edit a route plan. The figure below provides an overview
of the screens that are used for implementing the various route functions.
SELSClIK)UTENUWEN
I
--.
.
.-
-
-
+NlJ9
LEG1
L
ROUTE
PLAN
OPERAllONS
1
mlgcrEuTOmmer
1
PRESSENTTOEND
1
NOTE: AUTO SEOUENCE AT AJWVAJ.
pERpEwm2uuR
[OTG
=
UIM
\
OPERATION 3-30