Filter
Top Products
83
With the display box highlighted and flashing, press
ENT to open a list
of options. Scroll ↓ or ↑ to select a different data option, then press
ENT.
You can repeat these steps to change the display in another box. When
all your changes are finished, press
EXIT to return to the page display.
Customize Navigation Page
While on the Navigation Page press
MENU|↓ to CUSTOMIZE|ENT. Press ↓
or ↑ to select a display option. With the option highlighted, press
ENT to
check it (turn on) and uncheck it (turn off.) After all options are set,
press
EXIT to return to the page display.
Customize Map Page
While on the Map Page press
MENU|↓ to CUSTOMIZE|ENT. Press ↓ or ↑ to
select a display option. With the option highlighted, press
ENT to check
it (turn on) and uncheck it (turn off.) After all options are set, press
EXIT to return to the page display.
External Passive Antenna
The iFINDER HUNTc can be used with an optional external antenna.
While we recommend the powerful external active antenna, the unit can
operate with an external passive antenna as well. To do this, you have to
let the unit know it's looking for the antenna signals in a different way.
From the Satellite Status page, press
MENU|↓ to EXT PASSIVE ANT. Press
ENT to turn on (check) or turn off (uncheck) the command.
External Passive Antenna highlighted on Satellite Status Menu.
WARNING:
As long as the External Passive Antenna command is acti-
vated, the iFINDER will only monitor GPS signals from an
external passive antenna. If you have this command acti-
vated and are not using an external passive antenna, the
unit will not be able to accurately lock on.