Filter
Top Products
107
On the Edit Trail menu, press ↓ or ↑ to highlight the section you wish
to change, then press
ENT. Make your changes, then press EXIT to close
this menu.
You can also change the trail line color and pattern. For instructions,
see the entries on Edit a Trail Color and Edit a Trail Pattern in Sec. 4,
Advanced GPS Operations.
Units of Measure
This menu (shown below) sets the speed and distance (statute or nauti-
cal miles, meters), heading (true or magnetic) units, altitude and depth
(feet, fathoms, or meters), pressure (inches and millibars) and Time and
Date. To change the units:
In
Easy Mode, you first press MENU|↓ to UNITS OF MEASURE|ENT.
In
Advanced Mode, press MENU|MENU|↓ to SYSTEM SETUP|ENT|ENT.
Units of Measure command on System Setup menu (left).
Units of Measure Menu (right).
To set Speed/Distance Unit of Measure: Press ENT, then use the ↑
or ↓ keys to change the unit of measure for Speed/Distance and press
ENT. After the option is set, press EXIT repeatedly to return to the main
page display.
To set Heading: Press ↓ to
HEADING|ENT. Use the ↑ or ↓ keys to change
the unit of measure for heading and press
ENT. After the option is set,
press
EXIT repeatedly to return to the main page display.
To set Altitude and Depth: Press ↓ to
ALTITUDE and DEPTH|ENT. Use
the ↑ or ↓ keys to change the unit of measure for altitude and depth
and press
ENT. After the option is set, press EXIT repeatedly to return to
the main page display.