Filter
Top Products
64
Switch Back to Advanced Mode from Easy Mode
To leave Easy Mode and switch back to Advanced Mode:
1. Press
MENU|↓ to ADVANCED MODE|ENT.
2. A message will appear asking if you are sure you want to enter ad-
vanced mode.
3. Choose
YES and press ENT.
Switch to Hunting Mode
To leave Advanced Mode and switch to Hunting Mode:
1. Press
MENU|MENU|↓ to ENABLE HUNTING MODE|ENT.
2. A message will appear asking if you are sure you want to turn on
hunting mode.
3. Select
YES and press ENT.
Switch Back to Advanced Mode from Hunting Mode
To leave Hunting Mode and switch back to Advanced Mode:
1. Press
MENU|↓ to DISABLE HUNTING MODE|ENT.
2. A message will appear asking if you are sure you want to turn on
land navigation mode.
3. Choose
YES and press ENT.
Trails
A trail, or plot trail, is a string of position points plotted by the
iFINDER as you travel. It's a travel history, a record of the path you
have taken. Trails are useful for repeating a journey along the same
track. They are particularly handy when you are trying to retrace your
trip and go back the way you came.
Easy Mode only allows you to work with one trail. Advanced Mode lets
you save up to 10 trails in the iFINDER's memory. Since you can copy
these trails to MMCs in the form of GPS Data Files (*.usr format), the
only true limit on the number of trails you can record is the number of
MMCs you can carry in your pocket.
(For various trail options, see the Trail Options entry in Sec. 5.)
Create and Save a Trail
The iFINDER is set at the factory to automatically create and record a
trail while the unit is turned on. It will continue recording the trail un-
til the length reaches the maximum trail point setting (default is 2,000,
but the unit can record trails 9,999 points long). When the point limit is
reached, the iFINDER begins recording the trail over itself.