Filter
Top Products
97
This example shows the Pop-up Help message for the Screen com-
mand, located on the Main Menu in Advanced Mode.
Reset Options
In Advanced Mode
To reset all features to factory defaults, press MENU|MENU|↓ to SYSTEM
SETUP|ENT|↓ to RESET OPTIONS. Press ENT, which will asking you if you
want to reset all the options. Select
YES and press ENT.
In Easy Mode
Hold down the PAGES key while you press PWR to turn on the unit.
NOTE:
Reset Options does not erase any waypoints, routes, icons or plot trails.
Advanced Mode's Reset Options command (left),
and the Reset Options Menu (right).
Screen Contrast and Brightness
The adjustments work the same in both Easy and Advanced Mode, but
you access the
SCREEN command differently in each mode:
In Easy Mode, you first press
MENU|↓ to SCREEN|ENT.
In Advanced Mode, you first press
MENU|MENU|ENT.