Filter
Top Products
20
1. PWR/LIGHT (Power & Light) – The PWR key turns on the unit and
off and activates the backlight.
2. PAGES – Pressing this key switches the unit between the four page
screens in Easy Mode. (Satellite, Compass, Navigation and Map.) Each
page represents one of the unit's major operation modes.
3. MENU – Press this key to access menus, where you will be able to
select or adjust iFINDER features.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, move the map cursor and enter data.
5. ENT/SAVE (Enter & Save) – This key allows you to save data, ac-
cept values and execute menu commands.
6. EXIT – The Exit key lets you return to the previous screen, clear
data or close a menu.
7. FIND – The Find key launches iFINDER search menus and some
navigational functions.
8. ZOUT – (Zoom Out) – This key zooms out the screen allowing you to
see a larger geographic area on the map. Less detail is seen as you
zoom out.
9. ZIN – (Zoom In) – This key zoom in the screen so you can see greater
detail in a smaller geographic area on the map.
Power/lights on and off
To turn on the unit, press PWR. To turn on the backlight, press PWR
again. Pressing PWR a third time will turn off the backlight. (Press EXIT
to clear any message or alarm displays.)
Turn off the unit by pressing and holding the
PWR key for 3 seconds.
Main Menu
Easy Mode has a single Main Menu, which contains some function and
setup option commands. The tutorial in this section will deal only with
functions — the basic commands that make the iFINDER do something.
For these lessons, the iFINDER will work fine right out of the box with the
factory default settings. But, if you want to learn about the various options
and settings, see Sec. 5, System Setup and GPS Setup Options.