Filter
Top Products
45
Enable Hunting Mode: changes the unit mode of operation from Land
Navigation mode to Hunting mode.
GPS Setup: gives access to GPS receiver options, like GPS Simulator,
Track Smoothing and GPS Auto Search.
System Setup: give access to general configuration options like, Units
of Measure, Set Local Time, Reset Options, Popup Help and Transfer
My Data.
Utilities: allows users to modify settings for Sun/Moon calculator, Trip
Calculator, Timers and Alarm Clock.
Easy Mode: used to switch from Advanced Mode to Easy Mode. Easy
Mode shows only the most commonly used features to simplify the in-
terface and operation.
Browse MMC Files: load from or save to an MMC card GPS Data
Files containing waypoints, routes, trails and event marker icons.
Pages
Advanced Mode also referred to as Land Mode, has six Page displays
that represent the six major operating modes. They are the Satellite
Status Page, Digital Data Page, Compass Page, Navigation Page, Music
Mode Page and Map Page. They are accessed by pressing the
PAGES
key. Pressing PAGES scrolls through the six screens in an endless loop.
Each Page has a submenu screen associated with it. You access a Page
Submenu by pressing the
MENU key one time while the page is dis-
played. (Pressing the Menu key twice takes you to the Main Menu.)
Satellite Status Page
This page provides detailed information on the status of the iFINDER's
satellite lock-on and position acquisition. No matter what page you are
on, a flashing current position indicator/question mark symbol and
flashing GPS data displays indicate satellite lock has been lost and no
position is confirmed. This page shows you the quality and accuracy of
the current satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers have
stopped flashing!
NOTE:
Refer to Sec. 2, Easy Mode Operation, for further explanation and
more illustrations of the Satellite Page.
1. To get to the Satellite Status Page: press
PAGES repeatedly until it
appears on the screen.
2. To get to Satellite Status Menu: press
MENU.