Filter
Top Products
61
6. Repeat step five until the route reaches your destination.
7. To save your route, press
EXIT. The iFINDER reverts to the Route
screen, where the route has automatically been named Route 1 and
stored in the iFINDER's internal memory.
Edit Route Name highlighted in the top command box.
8. You can edit the name if you wish. Press ↑ to select the screen's top
command box, then press → to
EDIT ROUTE NAME|ENT. Press ↑ or ↓ to
change the first character, then press → to move the cursor to the next
character and repeat until the name is correct, then press
ENT.
9. You also can execute other route commands, such as
NAVIGATE ROUTE.
With the command box active, press → to highlight a different com-
mand, then press
ENT.
10. If you are finished with the route for now, you can return to the
last page displayed by pressing
EXIT repeatedly.
Delete a Route
1. From the
NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE
press MENU|MENU|↓ to ROUTE PLANNING|ENT.
2. Press ↓ to the route list and use ↓ or ↑ to select a route name|
ENT.
3. Press ←→ to
DELETE ROUTE|ENT. A message will appear asking if you
want to delete the route.
Select YES and press ENT.
Save GPS Data Files to an MMC
1. Press MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to TRANSFER MY
DATA|ENT.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present. If no MMC is present, you must first insert a card into
iFINDER in order to activate the Save command.
3. To save data from iFINDER to the MMC: press
ENT (for SAVE).