Filter
Top Products
49
When navigating to a waypoint or following a route, the Navigation
screen looks like the one shown in the following image. Customizable
data boxes on this screen can show information such as your ground
speed, track, distance and bearing to destination.
The compass is in Bearing Up mode. The facing direction is Northwest (a
321º heading) moving toward the waypoint at 321º (bearing). Since we are
navigating to a waypoint, the waypoint's icon appears on the edge of the
compass rose, indicating the proper direction.
Compass Menu
The Compass Menu allows you to set compass orientation, as well as
compass calibration (described in Sec. 7).
Navigation Page
This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. The navigation
screen looks like the one below when you’re navigating to a waypoint.
Your position is shown by an arrow in the center of the screen. Your
trail history, or path you’ve taken, is illustrated by the line extending
from the arrow. The large arrow pointing down at the top of the com-
pass rose indicates your current track (direction of travel).
NOTE:
Refer to Sec. 2, Easy Mode Operation, for further explanation and
more illustrations of the Navigation Page.
1. To get to Navigation Page, press
PAGE repeatedly until it appears on
screen.
2. To get to Navigation Page Sub Menu, press
MENU.
Current track or
heading, shown
in degrees
Compass bearing
to destination
Battery power
indicator
Navigation
information
data boxes
Track or compass
heading indicator,
showing facing
direction