Filter
Top Products
105
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time and distance. When it's in the default
mode, the unit doesn't update the plot trail while you're traveling in a
straight line. Once you deviate from a straight line, the unit drops a
plot point (trail waypoint) onto the trail. This conserves plot trail
points. If a plot trail uses all of the available points allotted to it, the
beginning points are taken away and placed at the end of the trail.
Trail Options menu with auto selected from the Update Criteria menu.
Press ↓ to UPDATE CRITERIA|ENT|press ↓ or ↑ to select criteria type|ENT.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds. The default is 3 seconds. You can update by distance, with a
range from 0.01 mile/nm/km to 9.99 mile/nm/km. The default is 0.10
mile.
With Update Criteria selected, press ↓ to select either
TIME or DISTANCE
and press ENT. Press ↓ to the UPDATE RATE or UPDATE DISTANCE boxes and
press
ENT. Use the ↓ ↑ keys to change the first character, then press →
to modify the next character, repeating the steps until you are satisfied
with the rate or distance figure you entered. Press
EXIT repeatedly to
return to the main page display.