100
Set Local Time Command (left) with Time Settings menu (right).
Once in the Time Settings menu:
To set Local Time: Press ENT. Press ↑ or ↓ to change the first charac-
ter, then press → to move the cursor to the next character. Repeat until
the time is correct, then press
ENT.
To set the Day: Press → to
DAY|ENT. Press ↑ or ↓ to select the day,
then press
ENT.
To set the Year: Press ↓ and → to
YEAR|ENT. Press ↑ or ↓ to select the
year, then press
ENT.
To set the Month: Press ← to
MONTH|ENT. Press ↑ or ↓ to select the
month, then press
ENT.
Adjusting the time (left); Adjusting the month (right).
The next field in this menu is CONFIG DST. This feature allows your unit
to automatically adjust with the time change caused by Daylight Sav-
ing Time (you should only have to set it once). You may select which set
of rules matches DST in your region or accept the default.