Filter
Top Products
113
4. To enter a street name, press ↓ to
STREET|ENT. There are two op-
tions: A. You can spell out the name in the top selection box. Press ↑ or ↓
to change the first letter, then press → to move the cursor to the next let-
ter and repeat until the name is correct, then press
ENT|ENT. B. Or jump
down to the lower selection list, press
ENT, then use ↓ or ↑ to select a
street name from the list and press
ENT. The street name you selected is
now in the street field.
Tip:
When entering a street name, do not enter the street's compass direc-
tion (N, S, E or W) in the street name field. Just enter the number, or
name. If the example below had been a search for "324 E. 9th St," you
would enter "9th" and press
ENT. The iFINDER will generate a list of
all possible 9th streets, and let you choose the one you want.
Find street field (left), Find street by name
menu (center), Street entry complete (right).
5. To enter a city name, press ↓ to CITY|ENT. You will be asked if you
want to find addresses only within a particular city. This option is de-
signed so you can limit an address search to a single city if necessary (see
the note below).
If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Press ↑ or ↓ to change the first letter, then
press → to move the cursor to the next letter and repeat until the name
is correct, then press
ENT|ENT. B. Or jump down to the lower selection
list by pressing
ENT, then press ↓ or ↑ to select a city name from the list
and press
ENT. The city name you selected is now in the city field. To re-
turn to the previous page, press
EXIT.
NOTE:
We recommend you do not enter a city name unless it is absolutely
necessary. The iFINDER can actually search quicker without a city.