Filter
Top Products
Platform Installations and Upgrades
Removing the Serial/Alarms Cable
1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see “
Removing the Chassis Cover.”
3. Remove the threaded standoffs as shown in
Figure 49.
TP01679
Figure 49. Removing the Serial/Alarms Cable Threaded Standoffs
4. Remove the serial/alarms connector from the chassis.
TP01680
Figure 50. Removing the Serial/Alarms Connector from the Chassis
Intel
®
Carrier Grade Server TIGI2U User Guide 71