Filter
Top Products
Platform Installations and Upgrades
TP01695
B
A
C
Figure 29. Installing Full Length PCI Card into Riser
6. Insert the PCI riser assembly into the chassis.
7. Install the chassis cover. For instructions, see “
Installing the Chassis Cover.”
Removing a PCI Add-in Card
1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see “
Removing the Chassis Cover.”
3. Disengage the power connector from the PCI riser card assembly.
4. Lift blue tabs and pull up on the riser to remove the PCI riser card assembly from the
chassis (see
Figure 27).
5. Place riser assembly as shown.
• To remove a low-profile PCI card (see Figure 30): Unlock the tool-less retention
bar as shown (see letter “A”) and pull the PCI card from the riser card slot (see
letter “B”).
• To remove a full-height PCI card (see
Figure 31): Unlock the retention bar as
shown (see letter “A”). Unscrew the PCI card bracket (see letter “B”) and pull
the PCI card from the riser card slot (see letter “C”).
Intel
®
Carrier Grade Server TIGI2U User Guide 53