Filter
Top Products
Platform Installations and Upgrades
Removing the Power Interface Board
1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see “
Removing the Chassis Cover.”
3. Remove the PCI riser assembly. For instructions, see “
Removing a PCI Add-in Card.”
steps 3 – 4.
4. Remove the processor air duct. For instructions, see “
Removing the Processor Air
Duct
.”
5. Remove the peripheral bay drive. For instructions, see “
Removing the CD-ROM /
DVD-ROM Drive
.”
6. Remove the power supply. For instructions, see “
Removing the Power Supply.”
7. Disconnect all power cables from the power interface board.
8. Press down on the power interface retention lever (see letter “A”) and pull up to
release the power interface board from the placement pegs (see letter “B”).
9. Lift the power interface board from the chassis (see letter “C”).
TP01701
A
C
B
Figure 47. Removing the Power Interface Board
Intel
®
Carrier Grade Server TIGI2U User Guide 69