Filter
Top Products
Platform Installations and Upgrades
5. Place riser assembly as shown.
• To install a low-profile PCI card (see
Figure 28): Unlock the tool-less retention
bar as shown (see letter “A”) and insert the card into one of the slots on the riser
connector (see letter “B”). Lock the tool-less retention bar into place.
• To install a full-height PCI card (see Figure 29): Insert the card into one of the
slots on the riser connector (see letter “A”) and screw the PCI card bracket into
place as shown (see letter “B”). Close the retention bar and lock it in place (see
letter “C”).
NOTE
When populating add-in cards, the add-in cards must be installed starting with the slot
furthest from the server board. For example, when using a three slot riser, a single add-in
card must be installed in the top PCI slot. A second add-in card must be installed in the
middle slot, and so on.
CAUTION
Press the riser card straight into the slot. Tipping it in the slot while
installing it may damage the riser card, board slot, or the PCI card.
TP01685
A
B
Figure 28. Installing Low-Profile PCI Card into Riser
Intel
®
Carrier Grade Server TIGI2U User Guide
52