Filter
Top Products
Platform Installations and Upgrades
Removing the Four-Fan Assembly
1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Remove the chassis cover. For instructions, see “
Removing the Chassis Cover.”
3. Remove the processor air duct. For instructions, see “
Removing the Processor Air
Duct
.”
4. Disconnect the fan connectors from the front panel I/O board (see letter “A” in
Figure
36
).
5. Remove the captive screw that attaches the four-fan assembly to the chassis (see
letter “B” in
Figure 36).
6. Lift the fan module and remove it from the chassis (see letter “C” in
Figure 36).
A
B
C
TP01672
Figure 36. Removing the Four-Fan Assembly
Intel
®
Carrier Grade Server TIGI2U User Guide
58