Filter
Top Products
Platform Installations and Upgrades
Replacing the Power Supply
CAUTION
Your server does not have a redundant power supply unless you have
purchased the optional second power supply. Before replacing the
power supply, you must first take the server out of service, turn off all
peripheral devices connected to the system, turn off the system by
pressing the power button, and unplug the AC power cord from the
system or wall outlet or disconnect the DC mains.
If you have a second power supply in your server, you can skip step
one in the instructions below.
Removing the Power Supply
1. Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2. Depress and hold the green lever to disengage the power supply (see letter “A”).
3. Grasp the black handle and pull the power supply from the chassis (see letter “B”).
TP01653
B
A
Figure 32. Removing the Power Supply
Intel
®
Carrier Grade Server TIGI2U User Guide 55