Filter
Top Products
80 iQue 3600a Que Applications Guide
Customizing Your iQue 3600a
You may want to change the way units of measure
and the time and date are displayed.
Changing the Measurement Units
If you live outside the United States, you may want to
change the measurement units to Metric.
To customize the Units setting:
1. Open Que Preferences.
2. Tap the on the left under the Preferences
menu bar and tap Units from the list.
3. Select the desired units for each
measurement.
Adjusting the Backlight and LED
Brightness
Tap the Brightness icon to open the brightness
adjustment slider for the backlighting and power
LED. When connected to external power, the power
LED has two brightness settings: Bright and dim.
Move the slider to the Left to lower the brightness and
to the Right to raise it.
Setting the Date and Time
If you are receiving satellite signals, your date and
time will be set automatically. You may need to adjust
the time zone and enable Daylight Saving Time.
To set the date and time:
1. From the Applications Launcher screen, tap
the Prefs icon .
2. Tap the pick list in the upper right corner
and tap Date & Time.
3. Select the proper date from the calendar.
4. Select your time zone, and then enter the
proper date and time. Enable or disable
Daylight Saving.
CUSTOMIZING THE QUE APPLICATIONS > CUSTOMIZING YOUR IQUE 3600A