Filter
Top Products
iQue 3600a Que Applications Guide 7
Using the Flip Cover
Your iQue 3600a comes with a leather flip cover to
protect the screen from being scratched.
To install the flip cover:
1. Squeeze the wire hinges gently to curve the
plastic base.
Squeeze the wire hinges in
2. Fit the feet of the plastic base into the slots
located on the bottom of the iQue 3600a.
Bottom of the iQue 3600a
Slots for the flip cover
3. Release the wire hinges. The cover is now
installed. When installed properly, the Garmin
logo is visible when the cover is flipped shut.
The cover cannot be installed on the unit while it is in
the Aviation Cradle. Before installing the unit in the
cradle, remove the cover.
To remove the cover:
1. Open the cover.
2. Squeeze the wire hinges and remove the feet
from the slots in the bottom of the iQue 3600a.
GETTING STARTED > USING THE FLIP COVER