Filter
Top Products
iQue 3600a Que Applications Guide 75
CUSTOMIZING THE QUE
APPLICATIONS
You will make most adjustments to your iQue 3600a
using the Que Preferences. Tap the Help buttons to
access additional information about the settings on
each Preferences page. You can also adjust certain
settings in the handheld, such as changing from
statute to metric units. Customize your unit using
Preferences (Prefs ).
To open Que Preferences:
1. Tap the Home icon to display the All or
System Applications Launcher screen.
2. Tap the
Prefs icon .
3. Tap the pick list in the top right corner and
select Que from the list.
Changing the GPS Settings
Enable and disable WAAS and Battery Saver Mode
through the GPS Preferences. You cannot turn on
WAAS and Battery Saver modes at the same time.
To enable WAAS or Battery Saver Mode:
2. Tap and
select GPS
from the
list.
1. Tap and
select Que
from the
list.
1. Open QueGPS.
2. Tap the Menu icon and tap Preferences.
3. Tap WAAS Enabled to enable the Wide Area
Augmentation System operating mode. See
the page 89 for more information about WAAS.
4. Tap Battery Saver to conserve battery power
by decreasing the frequency at which the GPS
receiver updates your position data. There is a
slight loss in position accuracy when on.
To conserve the most battery power, lower the
backlight level. Tap to adjust the backlight.
CUSTOMIZING THE QUE APPLICATIONS > CHANGING THE GPS SETTINGS