Filter
Top Products
30 iQue 3600a Que Applications Guide
Using Advanced QueNav
Features
Tap the menu icon to view additional options
when using QueNav. A description of some of these
options appears below. Refer to the previous page to
learn how to set the bug indicator and CDI (Course
Deviation Indicator) scale.
Enabling OBS
Enabling OBS mode suspends auto sequencing
of waypoints, but retains the current “active to”
waypoint as your navigation reference even after
passing the waypoint. When OBS is disabled the iQue
3600a returns to normal operation, with automatic
sequencing of waypoints. OBS mode also allows the
pilot to set the desired course to a waypoint.
To manually set a course to the destination
waypoint:
1. While navigating a route, press the Que button
to open QueNav.
2. Press MENU.
3. Highlight
Set OBS & Hold and press ENTER.
An OBS data field appears on the display.
4. Press the Rocker key and press ENTER. Use
the Rocker key to enter the OBS angle. Press
ENTER when the number is entered. Highlight
OK and press ENTER. The course deviation
needle and desired course pointer now provide
steering guidance to the selected course.
To release the waypoint hold and return to
automatic sequencing of route waypoints,
press MENU. Highlight Release Hold and
press ENTER.
Capturing the VNAV Profile
Select Capture VNAV Profile from the QueNav
options menu to center or re-center the VNAV
indicator on the graphic HSI. You must have entered
a valid vertical navigation profile and be navigating
flight plan. See “Setting up Your VNAV Profile” on
page 34 for more information on vertical navigation.
ADVANCED AVIATION OPERATION > USING ADVANCED QUENAV FEATURES