Filter
Top Products
22 iQue 3600a Que Applications Guide
Marking a Waypoint
Waypoints are locations or landmarks you record and
store in your GPS. They may be checkpoints on a
route or significant ground features.
The ENTER key lets you quickly capture your
present position to create a new waypoint. You must
have a valid 2D or 3D fix to mark your position.
For more information about editing waypoints, see the
“Editing Waypoints” section beginning on page 57.
To
mark your present position:
1. Press and hold ENTER until the Mark
Waypoint page appears. While in QueMap,
you can tap the Flag icon .
2. To accept the waypoint with the default name
(“Waypoint”), use the Rocker key to highlight
OK and press ENTER.
TIP: You can use the stylus and the Graffiti
®
2
area to “write” a new name for the waypoint on
the Mark Waypoint page.
To mark a selected location as a waypoint:
1. Open QueMap by pressing the Que button.
2. Use the Rocker key to move the arrow to the
location you want to save as a waypoint.
3. Press ENTER to open the information page.
Saving the selected item as a waypoint
4. To save the waypoint, use the Rocker key to
highlight Create Waypoint and press ENTER.
5. To accept the waypoint with the default name,
highlight OK and press ENTER
BASIC AVIATION OPERATION > MARKING A WAYPOINT