Filter
Top Products
20 iQue 3600a Que Applications Guide
Selecting an Approach
When you select an approach, the destination airport
is replaced with the sequence of waypoints for the
selected approach. Keep in mind that the airport must
have a published approach (GPS, RNAV, VOR, NDB,
localizer, or ILS) and only the final course segment
(usually from final approach fix to missed approach
point) of the published approach is available in the
iQue 3600a.
NOTE: The approaches provided in the
Jeppesen database are for monitoring purposes
only. The iQue 3600a is not an IFR-approved
instrument and should not be used as a primary
source of navigation guidance in instrument
conditions.
NOTE: When using a route, and on the final leg
of the route to the destination airport, the Select
Approach option allows you to quickly retrieve
and select available approaches. This option
overrides your current route. The original route
is still available for later use.
To select an approach for the destination
airport:
1. While navigating to a destination, open the Go
To page or the Active Route page.
2. Press MENU to open the options menu.
3. Highlight Select Approach and press ENTER.
4. Use the Rocker key to highlight the pick list
and press ENTER.
Highlight and press
ENTER to open the
Approach list.
5. Highlight the approach you want to use from
the pop-up list and press ENTER.
6. Highlight the Select button and press ENTER.
7. A Vectors pop-up window appears. See page
33 for more information on vectors to final.
Use the Rocker key to select Yes or No and
press ENTER. The iQue 3600a removes the
destination airport from the Go To and replaces
it with the approach waypoints.
BASIC AVIATION OPERATION > SELECTING AN APPROACH