Filter
Top Products
iQue 3600a Que Applications Guide 23
Creating a Flight Plan (Route)
When you create a Flight Plan (or route) using the
Active Route page, the route is automatically saved.
For more information about routes, refer to page 59.
To create a route:
1. Press the Que button to display the Active
Route page. Highlight Add Wpt (Waypoint)
and press ENTER.
2. QueFind opens allowing you to select an
aviation point. Enter the ID, Facility name, or
city. Highlight the desired point in the list.
3. Highlight OK and press ENTER. The selected
point is added to the route.
One leg added to the route.
Highlight and
press ENTER to
continue adding
waypoints.
4. Continue steps 2 and 3 until all points are
added to the route. The route is automatically
saved to the unit’s memory. The iQue
3600a begins navigating the route. To stop
navigation, press MENU, highlight Deactivate,
and press ENTER.
To navigate a Saved Route:
1. Press ESCAPE until the Que Applications
Launcher is displayed.
2. Use the Rocker key to highlight Routes and
press ENTER.
3. From QueRoutes, highlight Saved Routes and
press ENTER.
4. Highlight the route you want to take from the
list and press ENTER.
5. On the Route page, highlight Activate and
press ENTER.
NOTE: After you perform an update to your
Jeppesen Database, verify that all of your flight
plans in your unit are still current. If there is
an obsolete Jeppesen aviation point in a saved
route, the route will be locked and unusable. You
need to create a new route with current Jeppesen
Database points.
BASIC AVIATION OPERATION > CREATING A FLIGHT PLAN (ROUTE)