Filter
Top Products
94 iQue 3600a Que Applications Guide
Messages
Approaching Turn—you are nearing a turn in a route.
Arriving at Destination—you are nearing your destination.
Batteries Low—the battery needs to be recharged.
Can’t Unlock Maps—no applicable unlock code for one or
more maps was found. All MapSource maps are not accessible.
Database Error
—internal problem with the unit. Contact
your dealer or Garmin Product Support to have the unit
repaired.
Lost Satellite Reception—the unit is unable to continue
receiving satellite signals, temporarily.
Memory Full—unit memory is full; no more data can be
saved.
No Diff GPS Location—RTCM is selected, but the unit is not
receiving DGPS data.
None Found—no data matched the search criteria.
Route Already Exists
—you have entered a route name that
already exists.
Route Memory Full—no additional routes can be saved.
Route Truncated
—uploaded route from another device has
more than 50 waypoints.
Route Waypoint Memory Full
—no additional route
waypoints can be saved.
Track Already Exists
—a saved track with the same name
already exists.
Track Log Full
—the track log is full and track recording has
been turned off. In order to record more track points, you need
to clear the track log and turn track recording on. This is only
displayed when Record Mode is set to Off.
Track Memory Full
—no more track data can be stored
without deleting old data.
Track Truncated—a complete uploaded track will not fit in
memory. The oldest track log points have been deleted.
Transfer Complete
—data transfer has been completed.
Waypoint Already Exists
—a waypoint with the same name
already exists.
Waypoint Memory Full
—the unit has stored the maximum
number of waypoints.
APPENDIX > MESSAGES