Filter
Top Products
56
To restore System Setup Page features to the original factory settings:
1. Follow the steps on page 54 to select the System Setup Page.
2. Press MENU to display an options menu.
3. Use the ROCKER KEYPAD to highlight ‘Restore Defaults’ and press ENTER.
When downloading City Select data to your GPS V, you may be asked to supply
a “unit ID”. This information is provided under a ‘Software Version’ selection. As
improvements are made to GPS V operating software, you may also wish to refer to
the Software Version Page to see if a newer version of software is available (software
updates are provided online at http://www.garmin.com/support/).
To view the software version and unit ID:
1. Follow the steps on page 54 to select the System Setup Page.
2. Press MENU to display an options menu.
3. Use the ROCKER KEYPAD to highlight ‘Software Version’ and press ENTER.
Main Menu: Setup: Time
The Time Setup Page allows you to select a 12- or 24-hour time format, select your
local time zone and enable daylight savings time. The ‘UTC Offset’ readout indicates
the time difference between your local time zone and Coordinated Universal Time
(UTC; also referred to as Greenwich Mean Time). Your local time and date is displayed
at the bottom of the page.
To change a Time Setup Page feature:
1. Follow the steps on page 54 to select the Time Setup Page.
2. Use the ROCKER KEYPAD to highlight the feature you wish to change and press
ENTER. A pop-up window will appear with selections for that feature.
3. Use the ROCKER KEYPAD to highlight the desired setting and press ENTER.
Main Menu: Setup
When using unlock codes with your
MapSource City Select CD, you may need the
GPS V’s unit ID.
Use the Time Setup Page to select between
12- and 24-hour format, or to change time
zones. A ‘Set Date’ option can be used to
change the current year setting.
Reference
GPS V OM.indd 56 5/7/2003, 8:53:30 AM