Garmin 100022600 GPS Receiver User Manual


 
52
To set up the track log recording function:
1. Follow the steps on page 50 to select ‘Tracks’ and display the Saved Tracks Page.
2. Press the MENU key to display an options window.
3. Use the ROCKER KEYPAD to highlight ‘Setup Track Log’ and press ENTER.
4. Use the ROCKER KEYPAD to highlight ‘Wrap When Full’ and press ENTER to
check/uncheck this feature. When unchecked, the track log is recorded until avail-
able memory is full, then stops.
5. Use the ROCKER KEYPAD to highlight ‘Record Interval’ and press ENTER. Then
use the ROCKER KEYPAD to select the desired interval option (‘Distance’, ‘Time’ or
‘Auto’) and press ENTER.
6. Use the ROCKER KEYPAD to highlight ‘Value’ (or ‘Resolution’) and press ENTER.
Then use the ROCKER KEYPAD and ENTER to enter the desired value/setting.
7. When fi nished, use the ROCKER KEYPAD to highlight ‘OK’ and press ENTER.
To delete all saved track logs:
1. Follow the steps on page 50 to select ‘Tracks’ and display the Saved Tracks Page.
2. Press the MENU key to display an options window.
3. Use the ROCKER KEYPAD to highlight ‘Delete All Saved’ and press ENTER.
4. Use the ROCKER KEYPAD to highlight ‘Yes’ and press ENTER.
To clear the track log currently being recorded:
1. Follow the steps on page 50 to select ‘Tracks’ and display the Saved Tracks Page.
2. Use the ROCKER KEYPAD to highlight ‘Clear’ and press ENTER.
Main Menu: Tracks
Track logs can be recorded by time, distance
or ‘Auto’ intervals. ‘Auto’ uses a resolution
function where additional track points are
not saved until you deviate left/right from a
projected course.
From the Saved Tracks Page, press MENU to
select ‘Setup Track Log’ and modify the track
log recording settings.
Reference
GPS V OM.indd 52 5/7/2003, 8:53:27 AM