Filter
Top Products
38
Reference
Goto and Routes
5. Press MENU to display an options menu.
6. Use the ROCKER KEYPAD to select ‘Reverse Route’ or ‘Copy Route’ and press
ENTER. When copying a route, a new route is added to the route list with the same
name as the original, but with a one-digit number added to the end.
The Route Information Page includes two user-selectabe data fi elds. The factory
settings for these two data fi elds are leg distance (distance between each sequential pair
of route waypoints) and sunset time (for current location). You can change each data
fi eld to display different information suitable to your preferences.
To change a data fi eld(s):
1. Press the MENU key twice to view the Main Menu.
2. Use the ROCKER KEYPAD to highlight ‘Routes’ and press ENTER. A list of all
routes stored in memory is displayed.
3. Use the ROCKER KEYPAD to highlight any route in the list.
4. Press ENTER to display the Route Information Page for the selected route.
5. Press MENU to display an options menu.
6. Use the ROCKER KEYPAD to highlight ‘Change Fields’ and press ENTER.
7. Use the ROCKER KEYPAD to highlight the data fi eld you wish to change (look for
the small highlight box on one of the data fi eld titles) and press ENTER.
8. A pop-up list of available data types will appear. Use the ROCKER KEYPAD to
select the desired data type and press ENTER.
9. Press QUIT to remove the highlight from the changed data fi eld and return to
normal operation.
To restore the data fi elds to the factory default settings:
1. Follow steps 1 through 5 above.
2. Use the ROCKER KEYPAD to highlight ‘Restore Defaults’ and press ENTER.
Available data types for the ‘Change Fields’
option are listed on a pop-up window.
Use the ‘Restore Defaults’ option to restore
the original factory settings.
GPS V OM.indd 38 5/7/2003, 8:53:16 AM