Filter
Top Products
Reference Manual
00809-0100-4811, Rev CA
February 2006
Rosemount 3300 Series
4-26
To turn off the Burst Mode
In order to turn off the Burst Mode use one of the following options:
• The RCT program (requires that the Receive and Transfer Buffers for
the selected COM Port is adjusted)
• The Rosemount Burst Mode Switch software
• A 375 Field Communicator
• The AMS software
To set the COM port buffers
In order to be able to communicate with the 3300 in Burst Mode the Receive
and Transfer Buffers need to be adjusted as follows:
1. In the MS Windows Control Panel open the System option.
2. Choose the Hardware tab and click the Device Manager button.
3. Expand the Ports node in the tree view.
4. Click the right mouse button on the selected COM port and choose
Properties.
5. Select the Port Settings tab and click the Advanced button.
6. Drag the Receive Buffer and Transfer Buffer slides to 1.
7. Click the OK button.
8. Reboot the computer.