Filter
Top Products
Reference Manual
00809-0100-4811, Rev CA
February 2006
Rosemount 3300 Series
3-14
Figure 3-11. Threaded tank
connection.
1. For tank connections with BSP/G threads,
place a gasket on top of the tank flange, or
use a sealant on the threads of the tank
connection.
2. Lower the transmitter and probe into the
tank.
3. Screw the adapter into the process
connection.
4. Loosen the nut that connects the
transmitter housing to the probe slightly.
5. Rotate the transmitter housing so the
cable entries/display face the desired
direction.
6. Tighten the nut.
NOTE!
For adapters with NPT threads, pressure-tight
joints require a sealant.
Sealant on threads or
gasket (for BSP/G threads)
Nut
Tank connection
Probe
TRANSMITTER_MOUNT_THREAD.EPS