Filter
Top Products
Reference Manual
00809-0100-4811, Rev CA
February 2006
4-17
Rosemount 3300 Series
Using the Setup
Function
To install a 3300 transmitter by using the Setup function do the following:
Figure 4-11. RCT workspace
Figure 4-12. Setup Info
NOTE
When working with the Setup window keep in mind that for all tabs except the
Info tab, data is updated by clicking the Receive button. To download data to
the transmitter click the Send button.
1. Start the RCT software.
2. In the RCT workspace click the
Setup icon (make sure that the
Basic area is open),
or
choose the View>Setup menu
option.
Setup
Basic
RCT-RCT1
3. Choose the appropriate tab:
Info: information about the device.
Basics: Set Probe Type and
measurement units.
Analog: Variable assignment and
range value settings.
Tank Config: Tank height and other
geometry settings, dielectric
constants for vapor and upper
product.
Volume: specification of tank
geometry for volume calculations.
LCD: display panel settings.
RCT-SETUP_INFO