Filter
Top Products
Reference Manual
00809-0100-4811, Rev CA
February 2006
A-13
Rosemount 3300 Series
Code Process Connection - Size / Type (consult factory for other process connections)
ANSI Flanges in 316L SST (ASME A182)
AA 2 inch ANSI, 150 lb
AB 2 inch ANSI, 300 lb
AC 2 inch ANSI, 600 lb (HTHP / HP units)
AD 2 inch ANSI, 900 lb (HTHP / HP units)
AE 2 inch ANSI, 1500 lb (HTHP / HP units)
BA 3 inch ANSI, 150 lb
BB 3 inch ANSI, 300 lb
BC 3 inch ANSI, 600 lb (HTHP / HP units)
BD 3 inch ANSI, 900 lb (HTHP / HP units)
BE 3 inch ANSI, 1500 lb (HTHP / HP units)
CA 4 inch ANSI, 150 lb
CB 4 inch ANSI, 300 lb
CC 4 inch ANSI, 600 lb (HTHP / HP units)
CD 4 inch ANSI, 900 lb (HTHP / HP units)
CE 4 inch ANSI, 1500 lb (HTHP / HP units)
DA 6 inch ANSI, 150 lb
EN (DIN) Flanges in 316L SST (EN 1.4404)
HB DN50, PN40
HC DN50, PN64 (HTHP / HP units)
HD DN50, PN100 (HTHP / HP units)
IA DN80, PN16
IB DN80, PN40
IC DN80, PN64 (HTHP / HP units)
ID DN80, PN100 (HTHP / HP units)
JA DN100, PN16
JB DN100, PN40
JC DN100, PN64 (HTHP / HP units)
JD DN100, PN100 (HTHP / HP units)
KA DN150, PN16
Threaded Connections
RA 1 ½ inch NPT thread
RB 1 inch NPT thread (only available for probe type 3A, 3B, 4A, 5A, 5B)
SA 1 ½ inch BSP (G 1 ½ inch) thread
SB 1 inch BSP (G 1 inch) thread (only available for probe type 3A, 3B, 4A, 5A, 5B)
Proprietary Flanges
TF Fisher - proprietary 316 Stainless Steel (for 249B cages) Torque Tube Flange
TT Fisher - proprietary 316 Stainless Steel (for 249C cages) Torque Tube Flange
TM Masoneilan - proprietary 316 Stainless Steel Torque Tube Flange
(1) Process seal rating. Final rating depends on flange and O-ring selection. See “Process Temperature and Pressure Rating” on page A-4.
(2) Requires option None for sealing (no O-ring). Only for SST (Material of Construction model code 1).
(3) For other materials, consult factory.
(4) Requires High Temperature High Pressure (code H) or High Pressure (code P) probe.
(5) Extra length for fastening is added in factory.
(6) Probe weight included if applicable. Give the total probe length in feet and inches or meters and centimeters, depending on selected probe length unit.
If tank height is unknown, please round up to an even length when ordering. Probes can be cut to exact length in field. Maximum allowable length is
determined by process conditions.