Filter
Top Products
Reference Manual
00809-0100-4811, Rev CA
February 2006
Rosemount 3300 Series
A-14
Code Hazardous Locations Certifications
NA No Hazardous Locations Certifications
E1 ATEX Flameproof
E5 FM Explosion Proof
E6 CSA Explosion Proof
E7 IECEx Flameproof
I1 ATEX Intrinsic Safety
I5 FM Intrinsic Safety and Non-Incendive
I6 CSA Intrinsic Safety and Non-Incendive
I7 IECEx Intrinsic Safety
KA ATEX and CSA Flameproof/Explosionproof
KB FM and CSA Explosionproof
KC ATEX and FM Flameproof/Explosionproof
KD ATEX and CSA Intrinsic Safety
KE FM and CSA Intrinsic Safety
KF ATEX and FM Intrinsic Safety
Code Options
M1 Integral digital display
BT Bar Code Tag with tag number and purchase order number
P1 Hydrostatic testing
N2 NACE material recommendation per MR 01-75
(1)
LS Long stud 9.8 in (250 mm) for flex. single lead probe to prevent contact with wall/nozzle.Standard height is 3.9 in (100 mm)
CP Centering disc PTFE
(2)(3)
CS Centering disc SST
(2)(3)
T0 Terminal block without transient protection
Cx - Special Configuration (Software)
C1 Factory configuration (CDS required with order)
C4 Namur alarm and saturation levels, high alarm
C5 Namur alarm and saturation levels, low alarm
C8 Low alarm
(4)
(standard Rosemount alarm and saturation levels)
Qx - Special Certs
Q4 Calibration Data Certification
Q8 Material Traceability Certification per EN 10204 3.1B
(5)
(1) Valid for probe type 3A, 3B and 4A.
(2) Not available with PTFE covered probes.
(3) Valid for probe type 2A, 4A and 5A. Flanged connections only.
(4) The standard alarm setting is high.
(5) Option available for pressure retaining wetted parts.
Example Model String: 3301-H-A-1-S-1-V-1A-M-02-05-AA-I1-M1C1. E-02-05, means 2 ft and 5 inch probe length. M-02-05, means 2.05 m.