A SERVICE OF

logo

658 RADIUS Commands
Example
The following example specifies an authentication and encryption key of
lion-king
”.
console(config)#radius-server host acct 3.2.3.2
console(Config-acct-radius)#key keyacct
msgauth
Use the msgauth command to enable the message authenticator attribute to
be used for the RADIUS Authenticating server being configured. Use the
“no” form of this command to disable the message authenticator attribute.
Syntax
msgauth
no msgauth
Default Configuration
The message authenticator attribute is enabled by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#msgauth
name (RADIUS server)
Use the name command to assign a name to a RADIUS server. Use the no
form of the command to return the name to the default value.
Syntax
name
servername
2CSPC4.XModular-SWUM200.book Page 658 Thursday, March 10, 2011 11:18 AM