100 Command Groups
Port Aggregator
lacp system-priority Configures the system LACP priority. GC
lacp timeout Assigns an administrative LACP timeout. IC
no lacp Sets the LACP (Link Aggregation) mode to
default for that Aggregator Group.
PA
port-channel min-links Sets the minimum number of links that must
be up in order for the port channel interface
to be declared up.
IC
show interfaces port-
channel
Displays port-channel information. PE
show lacp Displays LACP information for ports. PE
show statistics port-
channel
Displays port-channel statistics. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode
a
add ethernet Adds member Ethernet port(s) to
the Aggregator Group.
PA
duplex Configures the full/half duplex
operation of all member ports in the
aggregator group/zone.
PA
minimum active uplinks Sets the minimum number of
uplinks to be active for the Group.
PA
mtu disable Sets the mtu size to default (1518)
on all the member ports in the
aggregator group/zone.
PA
negotiation Enables auto-negotiation of all
member ports in the aggregator
group/zone.
PA
port-aggregator group Enters Port Aggregator mode to
configure aggregator group
attributes.
GC
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 100 Thursday, March 10, 2011 11:18 AM
