OSPF Commands 1129
Router database summary
Router......................................... 0
Network........................................ 0
Summary Net.................................... 0
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Opaque AS...................................... 0
Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display
the information for the VLAN or loopback interface.
Syntax
show ip ospf interface [interface-type interface-number]
Syntax Description
Default Configuration
This command has no default configuration.
Parameter Description
interface-type Vlan or loopback
interface-number Valid VLAN ID or loopback interface number (Range: 0–7).
2CSPC4.XModular-SWUM200.book Page 1129 Thursday, March 10, 2011 11:18 AM
