280 Address Table Commands
---- -------------- ---- -------------
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1
show mac address-table static
Use the show mac address-table static command in User EXEC or Privileged
EXEC mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [address
mac-address
] [interface
interface-id
]
[vlan
vlan-id
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Parameter Description
mac-address A MAC address with the format xxxx.xxxx.xxxx.
interface-id Specify an interface type; valid interfaces include physical ports
and port channels.
vlan-id Specify a valid VLAN; the range is 1 to 4093.
2CSPC4.XModular-SWUM200.book Page 280 Thursday, March 10, 2011 11:18 AM
