156 Command Groups
banner exec Sets the message that is displayed after a
successful login.
GC
banner login Sets the message that is displayed just before
the login prompt.
GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
cut-through mode Enables the cut-through mode on the switch. GC
exec-banner Enables exec banner on the console, telnet or
SSH connection.
LC
hostname Specifies or modifies the switch host name. GC
initiate failover Forces failover of management unit. GC
ip address Sets a static OOB port IP address. IC (out-
of-band)
ip address none Disables DHCP/BOOTP on the OOB port. IC (out-
of-band)
ip address {dhcp/bootp} Enables DHCP/BOOTP on the OOB port. IC (out-
of-band)
login-banner Enables login banner on the console, telnet, or
SSH connection.
LC
member Configures the switch. SG
motd-banner Enables motd on the console, telnet, or SSH
connection.
LC
movemanagement Moves the Management Switch functionality
from one switch to another.
SG
nsf Specifies non-stop forwarding. GC
ping Sends ICMP echo request packets to another
node on the network.
UE
reload Reloads the operating system. PE
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 156 Thursday, March 10, 2011 11:18 AM
