306 Data Center Bridging Commands
Default Configuration
The default behavior is drop.
Command Mode
Datacenter-Bridging mode
User Guidelines
This command has no effect on interfaces not enabled for PFC.
Example
The following example creates a priority group that pauses dot1p priority 5 on
all interfaces.
console#config
console(config)#interface range ethernet all
console(config-if)#datacenter-bridging
console(config-if-dcb)#priority-flow-control mode on
console(config-if-dcb)#priority-flow-control priority
5 no-drop
show interfaces datacenter-bridging
Use the show interfaces datacenter-bridging command in Privileged EXEC
mode to display the datacenter-bridging configuration, status and counters
for a given interface.
Syntax
show interfaces datacenter-bridging [ethernet
interface
| port-channel
port-
channel-id
]
•
interface —
Valid Ethernet port.
•
port-channel-id
— A valid port-channel index.
Command Mode
Privileged EXEC
2CSPC4.XModular-SWUM200.book Page 306 Thursday, March 10, 2011 11:18 AM
