416 Ethernet CFM Commands
Default Configuration
By default, this command will transmit one loopback message with a timeout
of five seconds.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console #ping ethernet cfm mac 00:11:22:33:44:55 level
1 vlan 10 mpid 1 count 10
traceroute ethernet cfm
Use the traceroute ethernet command in Privileged EXEC mode to generate
a link trace message (LTM) from the configured MEP.
mac-addr The destination MAC address for which the connectivity needs
to be verified. Either MEP ID or the MAC address option can
be used.
remote-mpid The MEP ID for which connectivity is to be verified; i.e. the
destination MEP ID.
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
vlan-id A VLAN associated with the maintenance domain. Range: 1-
4094.
mpid The MEP ID from which the loopback message needs to be
transmitted.
count The number of LBMs to be transmitted. The default number is
1.
Parameter Description
2CSPC4.XModular-SWUM200.book Page 416 Thursday, March 10, 2011 11:18 AM
