A SERVICE OF

logo

Open as PDF
next previous
468 IP Addressing Commands
Example
The following example defines a default domain name of dell.com.
console(config)#ip domain-name dell.com
ip host
Use the ip host command in Global Configuration mode to define static host
name-to-address mapping in the host cache. To delete the name-to-address
mapping, use the no form of this command.
Syntax
ip host
name address
no ip host
name
•
name
— Host name.
•
address
— IP address of the host.
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a static host name-to-address mapping in the
host cache.
console(config)#ip host accounting.dell.com
176.10.23.1
2CSPC4.XModular-SWUM200.book Page 468 Thursday, March 10, 2011 11:18 AM