A SERVICE OF

logo

System Management Commands 1557
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command is only applicable to 10G non-stacking interfaces.
Example
console#show interfaces advanced firmware Te3/2/1
Transceiver firmware part number........... BCM54680E
Transceiver firmware revision...............0x0D
show ip interface out-of-band
Use the show ip interface out-of-band command to disable DHCP/BOOTP
on the OOB port.
Syntax
show ip interface out-of-band
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
console#show ip interface out-of-band
2CSPC4.XModular-SWUM200.book Page 1557 Thursday, March 10, 2011 11:18 AM