IP Addressing Commands 467
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the IP Domain Naming System (DNS)-based
host name-to-address translation.
console(config)#ip domain-lookup
ip domain-name
Use the ip domain-name command in Global Configuration mode to define
a default domain name used to complete unqualified host names. To delete
the default domain name, use the no form of this command.
Syntax
ip domain-name
name
no ip domain-name
•
name
— Default domain name used to complete an unqualified host
name. Do not include the initial period that separates the unqualified host
name from the domain name (Range: 1-255 characters).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 467 Thursday, March 10, 2011 11:18 AM
