1346 Configuration and Image File Commands
TFTP code transfer starting
9392640 bytes transferred...
File contents are valid.
File transfer operation completed successfully.
console#show bootvar
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
------------------------------------------------------------------
unit image1 image2 current-active next-active
------------------------------------------------------------------
1 M.9.11.2 M.9.11.3 image1 image1
After the file transfer completes, use the boot system command to
select the new image to run.
Example – Downloading and applying ias users file
console#copy tftp://10.131.17.104/aaa_users.txt ias-users
Transfer Mode.................................. TFTP
Server IP Address.............................. 10.131.17.104
File Path...................................... ./
File Name...................................... aaa_users.txt
Data Type...................................... IAS Users
2CSPC4.XModular-SWUM200.book Page 1346 Thursday, March 10, 2011 11:18 AM
